- Model NO.: YEJ
- Max.Capacity: >400 L/min
- Impeller Number: Single-Stage Pump
- Influent Type of Impeller: Single Suction Pump
- Impeller: Open
- Max.Head: >150m
- Driving Type: Motor
- Working Pressure: High Pressure Pump
- Position of Pump Shaft: Horizontal Pump
- Origin: Taizhou, China
ISW horizontal pipeline centrifugal pump Product description:
Pipeline centrifugal pump performance parameters according to IS-type centrifugal pump and pipeline, the reference to the ISO2858 and the latest national pipeline centrifugal pump standard JB / T53058-93 design and manufacture ofenergy efficient products. The pump uses advanced hydraulic model to optimize the design. At the same time according to temperature, different media on the basis of the ISG derived heat pumps, , high temperature pumps, chemical pumps, oil pump, etc., is the national standard stereotypes to promote products.
ISW horizontal pipeline centrifugal pump Model significance:
IS: Single-stage single-suction centrifugal pump horizontal straight
80: Pump inlet and outlet nominal diameter
160: Nominal diameter of the impeller
ISW horizontal pipeline centrifugal pump Product Features:
1, the pump for the vertical structure, import and export of the same caliber and are in the same center line, as the valve installed in the pipeline, compact appearance, small footprint, construction investment is low, such as with protective cover It can be placed outdoors.
2. An impeller directly on the motor shaft extension, short axial dimension, compact structure, reasonable configuration of pump and motor bearings can effectively balance the radial and axial loads generated by operation of the pump, thus ensuring the operation of the pump vibration balance very low noise.
3, seal with mechanical seal or mechanical seal assembly, the use of imported titanium alloy seal ring, medium and high temperature mechanical seal with carbide material, wear seal, can effectively increase the mechanical seal life.
4 Easy installation and maintenance, no need to open the pipeline system, as long as remove the pump conjoined nut to be pulled out all the rotor housing member.
5, namely the flow and head need to use pumps in series and parallel operation mode according to requirements.
6, using vertical and horizontal pumps installed according to the requirements of piping layout.
ISW horizontal pipeline centrifugal conditions of use:
1, the suction pressure ≤1.0Mpa, the maximum working pressure or pump system ≤1.6Mpa, pump suction pressure + pump head ≤1.6Mpa, hydrostatic test pump pressure 2.5Mpa, please specify when ordering system working pressure. Pump system working pressure greater than 1.6Mpa should be made when ordering separately. In order to manufacture the pump flow components and a coupling portion using steel materials.
2, the ambient temperature <40 , relative humidity <95%.
3, the transmission medium volume fraction of solid particles per unit volume does not exceed 0.1%, particle size <0.2mm.
ISW horizontal pipeline centrifugal pump Application:
1, ISW horizontal water pump for conveying water and physical and chemical properties similar to water or other liquids for industrial urban water supply and drainage, high-rise building pressurized water, garden irrigation, fire booster, long-distance transport, warm through the refrigeration cycle, bathrooms and other warm and cold pressurized water cycle and supporting equipment, the use of temperature T≤80 .
2, ISWR horizontal heat pumps widely used in: Metallurgy, chemical, textile, paper, as well as hotels and restaurants and other boilers, circulation of urban heating system, ISWR type temperature T≤120 .
3, ISWH horizontal chemical pump for conveying solid particles, corrosive, liquid viscosity similar to water, apply to the petroleum, chemical, metallurgical, power, paper, food, pharmaceutical and synthetic fiber and other departments, the use of temperature - 20 ~ + 120 .
4, ISWB horizontal pipeline oil transport gasoline, kerosene, diesel and other oil products or use flammable and explosive liquids are transported medium temperature of -20 ~ + 120 .
Note: If using the medium with small particles, please when ordering to using wearable mechanical seal.